| |
| ::::::::::::: PRODUCTS
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
 |
 |
W7-3
10"
12"
13"
Sealed
Range: 1.00 - 1.375 cu. ft. (28.3
- 38.9 ltrs)
Recommended Sealed Volume: 1.25
cu. ft. (35.4 ltrs.)
Fc: 44.7 Hz
F3: 40.7 Hz
Qtc: 0.785
Ported Range: 1.125 - 1.5 cu.
ft. (31.9 - 42.5 ltrs)
Recommended Ported Volume: 1.5
cu. ft. (42.5 ltrs)
Recommended Tuning: 32 Hz
Port Type: "Slot" ports
are recommended.
|
|
|
W6v2
10"
12"
Continuous
Power Handling: 400 Watts
Voice
Coil: 2.75" diameter, 4-layer,
Kapton former
Available
Configurations: Dual 4 ohm only
Xmax
(one-way, linear): 0.60" (15.2
mm)
Sealed
Enclosure Range: 0.50-1.00 cu.ft.
(14.0-28.0 liters)
Ported
Enclosure Range: 0.75-1.25 cu.ft.
(21.2-35.5 liters)
VRC
Technology: YES
W-Cone
Technology: YES
Elevated
Frame Technology: YES
Floating
Cone Attach Technology: YES
NeckVent
Technology: YES
|
 |
W3v2
10"
12"
Continuous
Power Handling: 400 Watts
Voice Coil: 2.5" diameter,
4-layer, Kapton former
Available Configurations: Dual
2 ohm or Dual 4 ohm
Xmax (one-way, linear): 0.68"
(17.1 mm)
Sealed Enclosure Range: 1.50-2.75
cu.ft. (42.5-78.0 liters)
Ported Enclosure Range: 2.50-4.00
cu.ft. (71.0-113.0 liters)
VRC Technology: YES
Cross-Drilled Pole Piece: YES
Elevated Frame Technology: NO |
 |
W0
8"
10"
12"
Continuous
Power Handling: 125 Watts
Voice Coil: 1.38" diameter,
6-layer, Kapton former
Available Configurations: 4 ohm
or 8 ohm (Single Voice Coil)
Xmax (one-way, linear): 0.34"
(8.6 mm)
Sealed Enclosure Range: 0.50-0.90
cu.ft. (14.0-25.5 liters)
Ported Enclosure Range: 0.90-1.50
cu.ft. (25.5-42.5 liters)
VRC Technology: YES |
 |
CS108TG
Power
Handling: 75W Continuous Driver:
One 8W0-4
Final Impedance: 4 Ohms Mono
Dimensions: 11.75"H x 17.00"W
x 8.25"D
Notes: Sealed enclosure,ideal
for compact pickup trucks.
|
 |
CS110TG
Power
Handling: 125W ContinuousDriver:One
10W0-4
Final Impedance: 4 Ohms Mono
Dimensions:12.25"H x 24.25"W
x 9.50"D
Notes: Sealed enclosure,Rear-firing
design- CS108TGPower Handling: 75W Continuous
Driver: One 8W0-4
Final Impedance: 4 Ohms Mono
Dimensions: 11.75"H x 17.00"W
x 8.25"D
Notes: Sealed enclosure,ideal
for compact pickup trucks.
|
 |
CS210RG
Power
Handling:250W
Continuous Drivers:CS210RG-W0-2:
Two 10W0-4CS210RG-W0-4: Two 10W0-8
Final Impedance: CS210RG-W0-2:2
Ohms MonoCS210RG-W0-4:4 Ohms Mono
Dimensions: 13.75"H x 32.25"W
x 11.88"D
Notes: Sealed enclosureRear-firing
design
|
 |
CS312RG
Power
Handling:375W Continuous
Drivers:
Three 12W0-8
Final Impedance: 2.7 Ohms Mono
Dimensions: 14.25"H x 37.75"W
x 20.00"D
Notes: Sealed enclosurerear-firing
design
|
|
|
1000/1
Rated
Power: 1000 W RMS @ 1.5 ohm-4 ohm
(11V-14.5V)
THD
at Rated Power: <0.05% @ 4 ohm
S/N
Ratio*:
>95dB below rated power
Frequency
Response:
5 Hz - 500 Hz (+0, -1dB)
Damping
Factor: >500 @ 4 ohm/50 Hz
Input
Range:
switchable from 200mV-2V RMS to 800mV-8V
RMS
Dimensions:
19.7"L
x 9.25"W x 2.36"H
|
|
|
250/1
Rated
Power: 250 W RMS @ 1.5 ohm-4 ohm
(11V-14.5V)
THD
at Rated Power: <0.05% @ 4 ohm
S/N
Ratio*:
>95dB below rated power
Frequency
Response:
5 Hz - 500 Hz (+0, -1dB)
Damping
Factor: >500 @ 4 ohm/50 Hz
Input
Range:
switchable from 200mV-2V RMS to 800mV-8V
RMS
Dimensions:
10.25"L
x 9.25"W x 2.36"H
|
|
MODELS
|
Specifications
|
|
300/4
|
Rated
Power (stereo): 75 W RMS x 4 @ 1.5
ohm-4 ohm (11V-14.5V)
Rated
Power (bridged): 150 W RMS x 2 @
3 ohm-8 ohm (11V-14.5V)
THD at Rated Power: <0.03%
@ 4 ohm
S/N Ratio*: >108.5 dB below
rated power
Frequency Response: 5 Hz-30 KHz
(+0, -1dB)
Damping Factor: >200 @ 4 ohm
per ch./50 Hz
Input Range: switchable from
200mV-2V RMS to 800mV-8V RMS
Dimensions:
13.4"L x 9.25"W x 2.36"H
|
|
500/1
|
Rated
Power: 500 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)
THD at Rated Power: <0.05% @
4 ohm
S/N Ratio*: >95dB below rated
power
Frequency Response: 5 Hz-500 Hz
(+0, -1dB)
Damping Factor: >500 @ 4 ohm/50
Hz
Input Range: switchable from 200mV-2V
RMS to 800mV-8V RMS
Dimensions: 13.4"L x 9.25"W
x 2.36"H |
|
|
e1400d
Rated
Power (mono): 120 W RMS x 1 @ 4
ohm (12.5V); 200 W RMS x 1 @ 2 ohm (12.5V)
THD at Rated Power: <0.08%
@ 4 ohm (20 Hz -20 kHz)
S/N Ratio: >104 dB referred
to rated power (A-weighted, 20 Hz
20 kHz noise bandwidth)
Frequency Response: 10 Hz
25 kHz (+0, -1dB)
Damping Factor: >200 @ 4 ohm
/ 50 Hz, >100 @ 2 ohm / 50 Hz
Slew Rate: ± 22V/µs
Input Range: 200mV 8V
RMS
Dimensions: 9.8" x 9.25"
x 2.36"
|
|
MODELS
|
Specifications
|
|
e1800d
|
Rated
Power: 480 W RMS x 1 @ 4 ohm (12.5V);
800 W RMS x 1 @ 2 ohm (12.5V)
THD at Rated Power: <0.08% @
4 ohm (20 Hz -25 kHz)
S/N Ratio: >90 dB referred to
rated power (A-weighted, 20 Hz - 20 kHz
noise bandwidth)
Frequency Response: 10 Hz - 25
kHz (+0, -1dB)
Damping Factor:>500 @ 4 ohm
/ 50 Hz>250 @ 2 ohm / 50 Hz
Input Range: 200mV - 8V RMS
Dimensions: 15.75" x 9.25"
x 2.36" |
|
e2150
|
Rated
Power (stereo): 45W RMS x 2 @ 4
ohm (12.5V); 75W RMS x 2 @ 2 ohm (12.5V)
Rated Power (bridged): 90W RMS
x 1 @ 8 ohm (12.5V); 150W RMS x 1 @
4 ohm (12.5V)
THD at Rated Power: <0.08%
@ 4 ohm (20 Hz - 20 kHz)
S/N Ratio: >104 dB referred
to rated power (A-weighted, 20 Hz
20 kHz noise bandwidth)
Frequency Response: 10 Hz
25 kHz (+0, -1dB)
Damping Factor: >200 @ 4 ohm
per ch. / 50 Hz, >100 @ 2 ohm per
ch. / 50 Hz
Slew Rate: ± 22V/µs
Input Range: 200mV 8V
RMS
Dimensions: 9.8" x 9.25"
x 2.36"
|
|
e4300
|
Rated
Power (stereo): 45W RMS x 4 @ 4 ohm
(12.5V); 75W RMS x 4 @ 2 ohm (12.5V)
Rated Power (bridged): 90W RMS
x 2 @ 8 ohm (12.5V); 150W RMS x 2 @ 4
ohm (12.5V)
THD at Rated Power: <0.08% @
4 ohm (20 Hz - 20 kHz)
S/N Ratio: >104 dB referred
to rated power (A-weighted, 20 Hz
20 kHz noise bandwidth)
Frequency Response: 10 Hz
25 kHz (+0, -1dB)
Damping Factor:>200 @ 4 ohm
per ch. / 50 Hz, >100 @ 2 ohm per ch.
/ 50 Hz
Slew Rate: ± 22V/µs
Input Range: 200mV 8V RMS
Dimensions: 13.8" x 9.25"
x 2.36" |
|
e6450
|
Rated
Power (stereo): 45W RMS x 6 @ 4 ohm
(12.5V); 75W RMS x 6 @ 2 ohm (12.5V)
Rated Power (bridged): 90W RMS
x 3 @ 8 ohm (12.5V); 150W RMS x 3 @ 4
ohm (12.5V)
THD at Rated Power: <0.08% @
4 ohm (20 Hz - 20 kHz)
S/N Ratio: >104 dB referred
to rated power (A-weighted, 20 Hz
20 kHz noise bandwidth)
Frequency Response: 10 Hz
25 kHz (+0, -1dB)
Damping Factor:>200 @ 4 ohm
per ch. / 50 Hz, >100 @ 2 ohm per ch.
/ 50 Hz
Slew Rate: ± 22V/µs
Input Range: 200mV 8V RMS
Dimensions: 17.7" x 9.25"
x 2.36" |
|
|
TR650-CSi
6.5-inch
(160 mm) Woofer
0.50-inch (12 mm) Tweeter
Grilles Included.
Perfect fit in many U.S. and European
vehicles.
50W Continuous Power Handling
Rec. Amp Power: 10 - 75 Watts
91.0 dB Efficiency @ 1W/1m
FR: 59 Hz - 22 KHz ± 3 dB
|
|
MODELS
|
Specifications
|
|
TR600-CXi
|
6-inch
(150 mm) Coaxial
Grilles Included
Perfect fit in many Japanese vehicles.
50W Continuous Power Handling
Rec. Amp Power: 10 - 75 Watts
90.5 dB Efficiency @ 1W/1m
FR: 59 Hz - 22 KHz ± 3 dB
|
|
TR650-CXi
|
6.5-inch
(160 mm) Coaxial
Grilles Included.
Perfect fit in many U.S. and European
vehicles.
50W Continuous Power Handling
Rec. Amp Power: 10 - 75 Watts
91.0 dB Efficiency @ 1W/1m
FR: 59 Hz - 22 KHz ± 3 dB |
|
TR570-CXi
|
5
x 7-inch (125 x 180 mm) Coaxial
Also fits 6x8-inch factory locations.
Perfect fit in most newer Ford vehicles.
50W Continuous Power Handling
Rec. Amp Power: 10 - 75 Watts
90.5 dB Efficiency @ 1W/1m
FR: 53 Hz - 22 KHz ± 3 dB |
|
TR690-TXi
|
6
x 9-inch (150 x 230 mm) 3-Way
Grilles Included
60W Continuous Power Handling
Rec. Amp Power: 10 - 100 Watts
90.5 dB Efficiency @ 1W/1m
FR: 53 Hz - 22 KHz ± 3 dB |
|
TR400-CXi
|
4-inch
(100 mm) Coaxial
Includes 4x6-inch Adaptor
Plates and Grilles
35W Continuous Power Handling
Rec. Amp Power: 10 - 50 Watts
84.5 dB Efficiency @ 1W/1m
FR: 71 Hz - 22 KHz ± 3 dB |
|
XR650-CSi
|
2-way
System:
6.5-inch (160 mm) Woofer,
1-inch (25 mm) Aluminum Dome Tweeter
Grilles Included
70W Continuous Power Handling
Rec. Amp Power: 25 - 150 Watts
89.5 dB Efficiency @ 1W/1m
FR: 48 Hz - 25 KHz ± 3 dB |
|
|
|
 |
::::::
BRANDS ::::::
::::::::::::::::::::::::
|